ADDITIVES

A blend of acrylic emulsions and special chemical modifiers that have been
specifically formulated to greatly improve the physical working and performance
characteristics of Portland cement based grouts.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards:A118.6
+Download Data Sheet
+Download MSDS

A premium latex additive and a dry-set mortar powder, CureCrete 936 is designed
for the installation of tiles in demanding exterior and interior conditions. Because
of its superior bond and flexural strengths, it is ideally suited for areas subjected
to movement, vibration and thermal shock.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A118.4
+Download Data Sheet
+Download Data Sheet
+Download MSDS
+Download MSDS

An acrylic latex emulsion formulated to enhance C-Cure grouts. CureCrylic 938
may also be used as an additive to C-Cure’s dry-set mortars for those less
demanding installations which require a latex Portland cement mortar. For C-Cure
grouts and mortars, CureCrylic 938 significantly improves bond strengths, provides
higher density, greater flexibility and resistance to thermal shock. CureCrylic 938’s
acrylic base provides UV stability enhancing a grout’s appearance through better
color retention and less fading caused by ultraviolet rays.
+Download Data Sheet
+Download MSDS

An acrylic latex emulsion that has been specifically formulated for addition to
C-Cure dry-set mortars to provide a bond coat for all types of tile over a variety
of substrates including exterior grade plywood (EGP). CureCrylic Premium 939
will provide improved bond strengths, freeze-thaw stability and increased flexural
strength over normal dry-set mortars.
Applicable ANSI Standards: A118.4
+Download Data Sheet
+Download MSDS

An acrylic polymer emulsion specifically formulated for use as an additive to
Portland cement-based construction repair grouts and coatings. CureCrylic
Ultra 940 significantly improves bond and compressive strength and provides
higher resistance to thermal shock. Because of its acrylic base, CureCrylic
Ultra 940 enhances the appearance of the grout and cement coatings because
it reduces fading caused by ultraviolet rays.
+Download Data Sheet
+Download MSDS

A modified latex admixture that greatly accelerates the set time of dry-set
mortars and grouts.
+Download Data Sheet
+Download MSDS

Specifically formulated to provide a durable bond to porcelain, stone and glass
tile. It is a high- solids blend of flexible acrylic additives which can be added to
both standard or fast-setting dry-set mortars including PermaBond^® 902,
Thinset 911 and PermaBond^® FastSet 904. It provides the highest bond strength
available in a flexible mortar for all types of tile over a variety of substrates.
Even difficult substrates including exterior grade plywood, vinyl and old cutback
adhesives can be bonded to with PST 948.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
Applicable ANSI Standards: A118.4
+Download Data Sheet
+Download MSDS

A blend of latexemulsions and special chemical modifiers formulated for the
addition to C-Cure’s dry-set mortars, grouts and underlayment systems. This
admixture when used in lieu of water will significantly improve the bond strength
and flexibility of mortar systems to particularly hard and smooth surfaces.
In addition, it will increase a mortar’s internal adhesion, frost resistance and
flexural strength. It also inhibits the penetration of water or other liquids.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A118.4
+Download Data Sheet
+Download MSDS